Detailed explanation of wall sticker installation steps: easy to get started, beautiful and effortless

Wall stickers are undoubtedly an economical and efficient choice for adding a touch of brightness to the home or changing the atmosphere of a room. No need for complex construction, just a few simple steps can make the wall look brand new. Today, we will provide a detailed analysis of the installation steps for wall stickers to help you easily create personalized home spaces. Special recommendation for original wallpapers, factory direct sales, guaranteed quality, located on the second floor of Gate 91 in Zone 4 of Yiwu International Trade City, with a variety of styles for you to choose from.

1、 Preparation work

Firstly, ensure that the wall is clean, flat, free of dust and oil stains. You can gently wipe the wall with a damp cloth and wait for it to dry naturally before proceeding to the next step. At the same time, prepare the necessary tools: scissors (or wallpaper knife), ruler, pencil, scraper (or hard cards such as bank cards), and necessary auxiliary materials such as gloves.

2、 Measurement cutting

According to the wall size or design requirements, use a ruler and pencil to mark the wall sticker, and then use scissors or wallpaper knives to cut along the marked line. Pay attention to keeping the edges flat and avoiding rough edges that may affect the appearance.

3、 Positioning and pasting

Before formal pasting, it is recommended to place the wall sticker on the wall for comparison to determine the optimal position and angle. Transparent tape or masking paper can be used for temporary positioning on the wall to ensure accurate placement of the wall sticker after pasting.

4、 Start pasting

Peel off the protective film (usually a transparent film) on the back of the wall sticker, and slowly attach it to the wall from one corner of the wall sticker. Use a scraper or hard card to gently scrape and press from the center outward, removing any air bubbles between the wall sticker and the wall surface to ensure a tight fit.

Attention: During the pasting process, keep your hands clean and dry to avoid leaving fingerprints or stains on the wall sticker. At the same time, the movements should be gentle to avoid excessive force that may cause deformation or damage to the wall stickers.

5、 Detail processing

Special attention should be paid to the edges or corners of wall stickers. You can use scissors or wallpaper knives to carefully trim excess parts, so that the wall stickers blend perfectly with the wall surface. At the same time, check whether there are bubbles or wrinkles on the surface of the wall sticker, and if necessary, use a scraper to correct them in a timely manner.

6、 Complete acceptance inspection

After the wall sticker is fully attached, take a few steps back to observe the overall effect. Check whether the wall stickers are flat, without bubbles or wrinkles, and whether the position is accurate. If necessary, minor adjustments or repairs can be made.

At this point, the installation work of the wall sticker is completed. With a few simple steps, you can bring new vitality and energy to your home space. The original wallpaper has won wide recognition in the market with its rich styles and high-quality products. Go to the second floor of Gate 91 in Zone 4 of Yiwu International Trade City to purchase your favorite wall forum!