Self adhesive electrostatic film installation tutorial: One stick beauty, saving time and effort

In today's pursuit of quality of life and home aesthetics, self-adhesive electrostatic films have become the preferred choice for many home decorations due to their easy operation and significant effects. No need for professional skills, you can easily complete it by yourself, making the wall look brand new. This article will provide you with a detailed introduction to the installation steps of self-adhesive electrostatic film, helping you quickly create your ideal home environment.

1、 Preparation work

Measurement and cutting: Firstly, accurately measure and cut the electrostatic film according to the wall size, leaving appropriate margin for adjustment.

Cleaning the wall: Use a clean and soft cloth or sponge, combined with a small amount of water or neutral cleaner, to thoroughly clean the wall, remove dust, oil stains and other impurities, and ensure that the wall is dry and free of moisture.

Preparation tools: Prepare scissors, scrapers (or hard cards such as bank cards), rulers, and necessary auxiliary tools.

2、 Installation steps

Positioning and pasting: Gently place the cut electrostatic film on the wall, compare the position, and ensure that the pattern matches the wall layout. If adjustment is needed, gently lift up one corner of the electrostatic film for fine-tuning.

Preliminary pasting: Starting from one end of the electrostatic film, gently press and paste it onto the wall, paying attention to keeping the film surface flat and avoiding the formation of bubbles or wrinkles.

Eliminate bubbles: Use a scraper or hard card to gently scrape and press from the center of the electrostatic film to the surrounding area to help eliminate air under the film and ensure that the electrostatic film is tightly attached to the wall.

Edge treatment: For the edge part, it can be carefully trimmed with scissors to ensure perfect alignment with the wall edge, achieving a neat and beautiful effect.

Natural air drying: After installation, let the electrostatic film air dry naturally for a period of time to ensure that it is completely fixed to the wall.

3、 Precautions

During the installation process, it is essential to keep hands clean and avoid contaminating the electrostatic film with oil stains or dust.

Static film is sensitive to temperature, and it is recommended to install it at room temperature to avoid operating in high or low temperature environments.

In case of difficulty in adhering the electrostatic film, a small amount of water mist can be sprayed on the film surface appropriately, but not in excess, to prevent moisture from seeping into the wall.

Choosing reliable quality electrostatic film products is crucial. Our first wallpaper manufacturer sells directly and is located on the second floor of Gate 91 in Zone 4 of Yiwu International Trade City. With a wide variety of products and guaranteed quality, we are the ideal choice for your home decoration.

By following the above steps, you can easily complete the installation of self-adhesive electrostatic film, instantly revitalizing your home space. Whether it's minimalist, retro, or modern, static film can perfectly match and add a touch of brightness to your home. First generation wallpaper, looking forward to working with you to create a beautiful home life!